H1 Sprockets

There seems to be more and more members appearing that are racing the ZXR400 so i've created a special section just for you to show off results, discuss meets etc etc.

Moderator: Moderators

Post Reply
Chazzman_bm
Posts: 44
Joined: Sat Apr 22, 2006 2:43 pm
My Bike: ZXR400 H1
Location: Scotland

H1 Sprockets

Post by Chazzman_bm »

I want to get a selection of rear sprockets (up to 50 - 52 teeth) for my H model ZX. Does anybody know where I can purchase sprockets or who can make them up for me?

Thanks.
Chazz.
zimm
zxr400 oc member
zxr400 oc member
Posts: 2320
Joined: Tue Oct 10, 2006 12:32 am
My Bike: ZXR400-M4, ZX4, ZX6R.
Location: Herefordshire

Re: H1 Sprockets

Post by zimm »

Chazzman_bm
Posts: 44
Joined: Sat Apr 22, 2006 2:43 pm
My Bike: ZXR400 H1
Location: Scotland

Re: H1 Sprockets

Post by Chazzman_bm »

Zimm mate,

Thanks for the reply. I've had a look at the usual distributors and their standard offerings but didn't see much for the H model. I'll try Renthal directly and see if they can make me up something.

Thanks so far.
stuzx4r
Posts: 38
Joined: Sat Oct 03, 2009 2:48 pm
My Bike: zxr400sp race bike
Location: runcorn, cheshire

Re: H1 Sprockets

Post by stuzx4r »

hi, the h1 runs suzuki gsxr fittment sprockets!! can't remember the exact model/year i will have it writen down some place though, raced a h1 for quite a few years and allways found dealers looked at you blank when asking for race sprockets for it, but ask for gsxr and they can always help! hmmm.

good luck, if i find the model i will put it up here for you.
zimm
zxr400 oc member
zxr400 oc member
Posts: 2320
Joined: Tue Oct 10, 2006 12:32 am
My Bike: ZXR400-M4, ZX4, ZX6R.
Location: Herefordshire

Re: H1 Sprockets

Post by zimm »

Chazzman_bm wrote:Zimm mate,

Thanks for the reply. I've had a look at the usual distributors and their standard offerings but didn't see much for the H model. I'll try Renthal directly and see if they can make me up something.

Thanks so far.

just give them a ring, they are available off the shelf.. least they were when i bought mine.
User avatar
cdstirland81
Posts: 183
Joined: Sat Jun 13, 2009 8:23 am
My Bike: ZXR400H1 and proud!
Location: derbyshire

Re: H1 Sprockets

Post by cdstirland81 »

stuzx4r wrote:hi, the h1 runs suzuki gsxr fittment sprockets!! can't remember the exact model/year i will have it writen down some place though, raced a h1 for quite a few years and allways found dealers looked at you blank when asking for race sprockets for it, but ask for gsxr and they can always help! hmmm.

good luck, if i find the model i will put it up here for you.


find that bit of paper, getting bored of blank looks!
ameteurs practice and train unitl they can do it, professionals practice and train until they cannot fail at it..
Post Reply