Im after a proper loud can for my zxr, which can is the loudest? I have a 64mm (on the inside) slip on micron can fitted at the moment.
Doesn't matter if its not road legal.
Even if its not for the zxr400 but fits a 64mm slip on link pipe.
Loudest end can?
Moderator: Moderators
-
- zxr400 oc member
- Posts: 404
- Joined: Tue Nov 18, 2008 8:59 pm
- My Bike: Kawasaki ZXR 400 L3
- Location: Manchester
Loudest end can?
If it's broke spray it with WD40, if it's still broke spray it again and leave it over night, if it's still broke, bin it.
- RedexRobB
- Site Admin
- Posts: 7212
- Joined: Fri Aug 30, 2002 7:37 pm
- My Bike: ZXR400L3
- Location: Ipswich, Suffolk
Re: Loudest end can?
If you want loud and dont care how loud, save yourself the money and forget the end can
-
- zxr400 oc member
- Posts: 404
- Joined: Tue Nov 18, 2008 8:59 pm
- My Bike: Kawasaki ZXR 400 L3
- Location: Manchester
Re: Loudest end can?
I thought that :p
Anythin else i gtta do? or just take the can off n go?
I heard u gtta have it jetted ?
Anythin else i gtta do? or just take the can off n go?
I heard u gtta have it jetted ?
If it's broke spray it with WD40, if it's still broke spray it again and leave it over night, if it's still broke, bin it.
- masterofinsanity
- Site Admin
- Posts: 8103
- Joined: Thu Aug 29, 2002 12:36 am
- My Bike: Aprilia Tuono Fighter
- Location: England
- Contact:
Re: Loudest end can?
you will lose power taking the end can off so adviseable to get it dyno'd and setup for it.
Don't forget people there is more to the zxr400 than this forum... check out www.zxrworld.co.uk also.
-
- zxr400 oc member
- Posts: 404
- Joined: Tue Nov 18, 2008 8:59 pm
- My Bike: Kawasaki ZXR 400 L3
- Location: Manchester
Re: Loudest end can?
But it would be perfectly safe for me to just take the end can off and use the bike without any damage being done?
Gonna see how loud it is first as it may be too loud.
If i like the sound i'll get it set up however i do like a good looking can
Gonna see how loud it is first as it may be too loud.
If i like the sound i'll get it set up however i do like a good looking can
If it's broke spray it with WD40, if it's still broke spray it again and leave it over night, if it's still broke, bin it.
-
- L-plate hell
- Posts: 279
- Joined: Sat Sep 06, 2008 10:54 pm
Re: Loudest end can?
Get something like a micron oval, which are reasonably loud anyway, then chop it, sounds like rolling thunder!! lol
-
- zxr400 oc member
- Posts: 404
- Joined: Tue Nov 18, 2008 8:59 pm
- My Bike: Kawasaki ZXR 400 L3
- Location: Manchester
Re: Loudest end can?
Well I've currently got a round micron on mine how do u chop it? Just cut a section out n weld it back togther? I'd have to get sumone else to do it like cuz I'd balls it up.
If it's broke spray it with WD40, if it's still broke spray it again and leave it over night, if it's still broke, bin it.
- simmo
- Posts: 166
- Joined: Sun Sep 07, 2008 4:56 pm
- My Bike: zxr400L/vfr400nc30/er5
- Location: Leicester
- Contact:
Re: Loudest end can?
i have rode my vfr without an end can on it, and f*** me its loud.
it hurt my ears even with ear plugs in!!
ya want to get a stubby can or moto gp style can
it hurt my ears even with ear plugs in!!
ya want to get a stubby can or moto gp style can
-
- Posts: 16
- Joined: Fri Aug 29, 2008 2:39 pm
- My Bike: ZX4R L3
Re: Loudest end can?
i chopped down my scorpion after i came off my bike it scraped all the edge of the titanium so i drilled the rivits out took it apart and with a pair of tin snips cut around 4inchs off, i also rem,oved some of the wadding and now it looks better and sounds awsome. especially when nailing it and just shut off and let the revs drop it pops and bangs and occasionally licks flames,
ZX4R L3
-
- L-plate hell
- Posts: 279
- Joined: Sat Sep 06, 2008 10:54 pm
Re: Loudest end can?
How would i go about chopping a micron oval? lol Its no riveted at the front...Would i need to weld it back together?
Including the bit that bolts to the exhaust hanger? As that is riveted onto the part i would need to chop...
Including the bit that bolts to the exhaust hanger? As that is riveted onto the part i would need to chop...