What diametar of exhaust can

[bato]

What diametar of exhaust can you have on yours zxr 400.
I looking for some cans but I dont know what is maximum size of pipe 50mm?

[masterofinsanity]

are you talking of the inlet pipe for slip-on cans?

[bato]

I want to change silencer and I cant finde for zxr 400.There is some cans for other models 600 or 750 and they have major pipes.
I want to know what is max diametar for outlet pipe for silencer which bike hawent problem to working.

[rover220]

od of the link pipe on my micron is 63mm if thats any help.

[bato]

what is the inside diameter of fool micron exhaust link pipe between colector and can ?
I just by Akrapovic hexagonal and inside diametar of can is 52.
I want to change pipe between colector and can but I dont know what iside diameter of pipe.

PS sound is terror

[parby81]

ps spelling is terror mate

[bato]

I am sorry about my spelling.
But if that maximum what you can telling to us about my question that is not something big.
Thanks for your hard pawn !!!!!!!!!

[Mori Man]

If your making a "Hybrid" system then you govern what diameter's are involved.

I have tried many systems on my other 400 and all do something different in the rev range.

When i had a 60.5mm internal link pipe and can with 54mm exit it made the bike pick up very quickly and smoothly.
When it was the above with a 60.5mm exit on the can it had more low end grunt and revved out like a whippet on amphetamines but the midrange had no life for the twisties.

A 50.8mm link pipe onto a 60.5mm can had great midrange but no feeling anywhere else
The same with a shorter can just revved out smoothly, with a DB killer it it the "kick" came back.

Have fun experimenting, I'm still at it

[bato]

I try Akrapovic hexagonal for Hayabusa .Internal link on the can is 52 mm and external on the can is 52.
On the original link pipe I have lower power on the lower rpm.
Now I want to change linking pipe and I want to know can I made shorter linking pipe than original.
Lenght of can is same than stock can.

akrapovichex.jpg

[Mori Man]

I try Akrapovic hexagonal for Hayabusa .Internal link on the can is 52 mm and external on the can is 52.
On the original link pipe I have lower power on the lower rpm.
Now I want to change linking pipe and I want to know can I made shorter linking pipe than original.
Lenght of can is same than stock can.

akrapovichex.jpg

Try making can exit 60+mm

If you make shorter link pipe just make sure to account the the new alignment of the can, you might sacrifice some top end in doing so.

[bato]

I cant changing diameters on the can.That is open can 52mm in and 52mm out