Which race can

Post by **nick_c** » Fri Dec 07, 2007 9:07 pm

Hello, I have just got hold of a set of micron delta down pipes, but, no end can.

Does anyone know where I can get a new micron race can from?

Or can anyone recommend a different make of can that will fit the micron pipes?

Cheer's Nick.

Post by **masterofinsanity** » Sat Dec 08, 2007 10:57 pm

is that the slip on version?? have you tried scorpion?

Post by **nick_c** » Mon Dec 10, 2007 8:08 pm

Hello, yes it is a slip on can, I have not seen a micron race can, but, I assume it has some sort of clamp to tighten around the exit pipe.

I will send scorpon an e-mail.

Cheer's Nick.

Post by **rover220** » Mon Dec 10, 2007 8:53 pm

try exhaust technologies for micron race can, thats where my full micron system came from anyhow.

Post by **rene** » Tue Dec 11, 2007 9:47 am

you'll be able to fit any can you want as long as its slip and the same inlet size

Post by **Northern ANdy** » Tue Dec 11, 2007 10:28 am

thats were the fun starts, how many cans have a slip on to fit 63mm

Post by **rene** » Tue Dec 11, 2007 10:50 am

carbon can co, quill ect any can builder will be able to id expect

Post by **Northern ANdy** » Tue Dec 11, 2007 3:21 pm

at cost though. 63mm isn't a run of the mill size, its needs rolling or swaging out from 2 1/2"
I've been quoted Â£50 plus just for the pipe to be rolled, seam welded and then butt welded into a plate that will accept a bolt on can.

Post by **masterofinsanity** » Tue Dec 11, 2007 4:14 pm

yoshi are 62-63mm.

Post by **nick_c** » Tue Dec 11, 2007 7:50 pm

Cheer's for the replys, I googled exhaust technologies and it brings up Micron themselves, I have asked and they have no stock.

I will wait a few weeks and see if I can get hold of a second hand one, if not looks like I will be enquiring for a custom fit can.

Thanks again, Nick.

tobomoto · Post by **tobomoto** » Sun Dec 23, 2007 10:20 pm

i asked carbon can co in january at excell show. they said no problem. at nec show they said no way! i found one from fuel, stainless stubby oval race delivered for 145 quid. sounds like a tank now rather than an asthmatic washing machine.

Post by **jake** » Sun Dec 23, 2007 11:48 pm

id just run the open pipe dude

Post by **nick_c** » Wed Dec 26, 2007 10:21 pm

Thank you for the help, now have a micron race can.

Just got to find the time to fit it all and the money to get it set up.

Cheer's Nick.

Post by **rover220** » Thu Dec 27, 2007 7:54 am

are you confident in setting up the jets yourself?

Post by **nick_c** » Thu Dec 27, 2007 1:53 pm

No. I have no experience of setting a bike up. I have contacted road and track in Aylesbury, they have been highly recommended, I will be letting them do the work. He said a mixture of dyno jet parts and kawasaki parts was the best way to go about things.

www.zxrworld.co.uk

Which race can

Which race can

Re: Which race can

Re: Which race can

Re: Which race can

Re: Which race can

Re: Which race can

Re: Which race can

Re: Which race can

Re: Which race can

Re: Which race can

Re: Which race can

Re: Which race can

Re: Which race can

Re: Which race can

Re: Which race can