HI . just bought a race can for my H1 and the bolt holes are 180° out so the can is now on
upside down. any one any ideas on how i can solve this. many thanks
RACE CAN 180° OUT
Moderator: Moderators
-
Mori Man
- Blingmeister
- Posts: 1976
- Joined: Thu May 10, 2007 3:30 pm
- My Bike: ZXR400J2
- Location: JAPAN
Re: RACE CAN 180° OUT
Drill the rivets out , spin mounting plate 18-' and re rivet - job done.
MM!
MM!
Nothing worse than having an H and not being able to scratch it !
Living life on the edge, SuPposedly
Living life on the edge, SuPposedly
-
diamondgeezer
- Posts: 2
- Joined: Sun Apr 18, 2010 2:23 pm
- My Bike: zxr 400 h1
Re: RACE CAN 180° OUT
i was not sure if it was just that easy. i will have a go later and will
let you know. cheers fella
let you know. cheers fella
-
cargo
- zxr400 oc member
- Posts: 3341
- Joined: Sat Jan 08, 2005 10:33 am
- My Bike: tomos moped
- Location: Carrickfergus Northern Ireland
Re: RACE CAN 180° OUT
You could also drill the rivets at the other end (outlet) and turn that 180 degress
-
Mori Man
- Blingmeister
- Posts: 1976
- Joined: Thu May 10, 2007 3:30 pm
- My Bike: ZXR400J2
- Location: JAPAN
Re: RACE CAN 180° OUT
Good point , well madecargo wrote:You could also drill the rivets at the other end (outlet) and turn that 180 degress
or just go Japanese rain catcher style
( I kid you not!)Nothing worse than having an H and not being able to scratch it !
Living life on the edge, SuPposedly
Living life on the edge, SuPposedly