Tyga conversions question?
Moderator: Moderators
-
- Posts: 3
- Joined: Sun Mar 29, 2009 12:30 pm
- My Bike: zxr400 L9
Tyga conversions question?
Ok well the tyga website has a complete bodykit for the zxr250 so i was just wondering if this kit would fit the 400 L? Cheers guysss
- masterofinsanity
- Site Admin
- Posts: 8103
- Joined: Thu Aug 29, 2002 12:36 am
- My Bike: Aprilia Tuono Fighter
- Location: England
- Contact:
Re: Tyga conversions question?
i would certainly like to try it!
You do not have the required permissions to view the files attached to this post.
Don't forget people there is more to the zxr400 than this forum... check out www.zxrworld.co.uk also.
- RedexRobB
- Site Admin
- Posts: 7212
- Joined: Fri Aug 30, 2002 7:37 pm
- My Bike: ZXR400L3
- Location: Ipswich, Suffolk
Re: Tyga conversions question?
If youve got the patience and time you can fit anything i reckon. chrissBB fitted a ZX6 bodykit to his.
-
- Posts: 23
- Joined: Wed Mar 14, 2012 9:43 am
- My Bike: In between bikes
Re: Tyga conversions question?
Did anyone go anywhere with this?
-
- Posts: 14
- Joined: Fri Jun 01, 2018 11:55 am
- My Bike: ZXR400 L1
- Location: Norway
Re: Tyga conversions question?
Hi!
How did this work out? Love that rear fairing! ( in my opinion the only body figure that the 400L misses)
Found a step-by-step fitting modul on the zxr250 subframe here: http://tyga-performance.com/images/00ps ... ninjas.pdf
Can it be done on the 400, or does det 250 subframe fit/adjust to the 400L mainframe?
Has anyone tried something like that? I've seen a lot of questions on previous posts, but no feedback/pics on results..
thanks
How did this work out? Love that rear fairing! ( in my opinion the only body figure that the 400L misses)
Found a step-by-step fitting modul on the zxr250 subframe here: http://tyga-performance.com/images/00ps ... ninjas.pdf
Can it be done on the 400, or does det 250 subframe fit/adjust to the 400L mainframe?
Has anyone tried something like that? I've seen a lot of questions on previous posts, but no feedback/pics on results..
thanks
For those in disspair - I'm new to this
- banner001
- Track day God
- Posts: 2589
- Joined: Sat Sep 24, 2011 3:27 pm
- My Bike: ZXR400 L4
- Location: Nuneaton
Re: Tyga conversions question?
its a 9 year old post...doubtful it came to anything...
ive got both a zxr250 and a 400, the 250 is quite narrow, and i can 100% confirm that the subframe wont natively fit a zxr400L unless you want to be sat at a 30 degree incline :d
ive got both a zxr250 and a 400, the 250 is quite narrow, and i can 100% confirm that the subframe wont natively fit a zxr400L unless you want to be sat at a 30 degree incline :d
UK ZXR400 L3 (1993) - Fully restored and on the roads, my green beast!
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said
-
- Posts: 14
- Joined: Fri Jun 01, 2018 11:55 am
- My Bike: ZXR400 L1
- Location: Norway
Re: Tyga conversions question?
Hi!
Yeah, I saw it was an old post, but thought i should ask either way
Thanks for the response! My newbie-ness shines through, but I would rather ask a "stupid" question, then not know at all
Well... that sounds like a rather awful position to ride
Yeah, I saw it was an old post, but thought i should ask either way
Thanks for the response! My newbie-ness shines through, but I would rather ask a "stupid" question, then not know at all
Well... that sounds like a rather awful position to ride
For those in disspair - I'm new to this
- banner001
- Track day God
- Posts: 2589
- Joined: Sat Sep 24, 2011 3:27 pm
- My Bike: ZXR400 L4
- Location: Nuneaton
Re: Tyga conversions question?
The zxr400L subframe width is 236mm, my '89 zxr250 is 180mm...
UK ZXR400 L3 (1993) - Fully restored and on the roads, my green beast!
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said