h1 fairings needed
Moderator: Moderators
-
- Posts: 22
- Joined: Thu Oct 13, 2011 2:48 pm
- My Bike: kawasaki zxr 400 h1
- Location: cambridgeshire
h1 fairings needed
hi all
i been looking on ebay endlessly for h1 fairings or even one lol does anybody know where anyare or if you can get them from anywhere
thanks deano
i been looking on ebay endlessly for h1 fairings or even one lol does anybody know where anyare or if you can get them from anywhere
thanks deano
HELL WAS FULL SO THEY SENT ME BACK
- zxr400rider
- zxr400 oc member
- Posts: 59
- Joined: Mon Nov 30, 2009 8:14 pm
- My Bike: zxr400 h1
- Location: swindon
Re: h1 fairings needed
they do pop up on ebay but not very often, try skid marx they do side panels and front fairing for 239.95 http://www.skidmarx.co.uk/section/bodyw ... asaki.html
i got a front panel and the rear seat panels going soon as i just brought new fairing, unfortunately the side panels wont be any good.
i got a front panel and the rear seat panels going soon as i just brought new fairing, unfortunately the side panels wont be any good.
ZXR400 H1 gsxr600 srad rear shock, h2 front forks, delkevic downpipes, art end can,110 mainjets, braided brake lines, L model single seat, led rear light and LOTS of fun
-
- Posts: 22
- Joined: Thu Oct 13, 2011 2:48 pm
- My Bike: kawasaki zxr 400 h1
- Location: cambridgeshire
Re: h1 fairings needed
thanks for your help
i did have someone but i have repaired them so many times i got a nose cone second hand just need front lower side panels lol i did get some off ebay new but they all cracked in places after 5 or 6 rides
thanks anyway
i did have someone but i have repaired them so many times i got a nose cone second hand just need front lower side panels lol i did get some off ebay new but they all cracked in places after 5 or 6 rides
thanks anyway
HELL WAS FULL SO THEY SENT ME BACK
- Mori Man
- Blingmeister
- Posts: 1976
- Joined: Thu May 10, 2007 3:30 pm
- My Bike: ZXR400J2
- Location: JAPAN
Re: h1 fairings needed
Got a pair of all Black ones here - need to check the mountings on them but think they are all good.
They were going to be used on my "Black" build as I have a tank too but that bike has turned into another Green build
Postage will be a wee bit hefty but if in no rush cause of winter then seamail is cheap.
MM!
They were going to be used on my "Black" build as I have a tank too but that bike has turned into another Green build
Postage will be a wee bit hefty but if in no rush cause of winter then seamail is cheap.
MM!
Nothing worse than having an H and not being able to scratch it !
Living life on the edge, SuPposedly
Living life on the edge, SuPposedly
-
- Posts: 22
- Joined: Thu Oct 13, 2011 2:48 pm
- My Bike: kawasaki zxr 400 h1
- Location: cambridgeshire
Re: h1 fairings needed
hi MM
thanks for the offer but i think i have got some off a man bracking his zxr h1 lol i think i buying the whole bike
that will be 3 zxrs
thanks you anyway tho and a black built would be a good build i think
thanks for the offer but i think i have got some off a man bracking his zxr h1 lol i think i buying the whole bike
that will be 3 zxrs
thanks you anyway tho and a black built would be a good build i think
HELL WAS FULL SO THEY SENT ME BACK
- Mori Man
- Blingmeister
- Posts: 1976
- Joined: Thu May 10, 2007 3:30 pm
- My Bike: ZXR400J2
- Location: JAPAN
Re: h1 fairings needed
Keep collecting dude, you will catch up with me and that's no bad thing
Got to luv them H's
Got to luv them H's
Nothing worse than having an H and not being able to scratch it !
Living life on the edge, SuPposedly
Living life on the edge, SuPposedly
-
- Posts: 22
- Joined: Thu Oct 13, 2011 2:48 pm
- My Bike: kawasaki zxr 400 h1
- Location: cambridgeshire
Re: h1 fairings needed
haha how many you got now then ?
and im looking for more lol but have to stop collecting soon as we have a baby on the way prob collect little bits tho
im a bit stuck on whether to got o.e.m route or custom any ideas nearly got my top yoke polished up and engraved and im making up some inner fairing bits in alloy instead of plastic and keeping white green blue colours but stuck after that any help ?
and im looking for more lol but have to stop collecting soon as we have a baby on the way prob collect little bits tho
im a bit stuck on whether to got o.e.m route or custom any ideas nearly got my top yoke polished up and engraved and im making up some inner fairing bits in alloy instead of plastic and keeping white green blue colours but stuck after that any help ?
HELL WAS FULL SO THEY SENT ME BACK
- Mori Man
- Blingmeister
- Posts: 1976
- Joined: Thu May 10, 2007 3:30 pm
- My Bike: ZXR400J2
- Location: JAPAN
Re: h1 fairings needed
If I secure another two sets of wheels I will be up to five
Look forward to seeing your heat shields done in alloy
Going to send a bunch of brackets of to be done in aluminium alloy for some extra bling value
Seen a Xanthius with a ZX6 swingarm on it at the weekend and that has spurred me on to get the MotoGP arm built Next influx of cash coming in it will get sent off for modding
You going to do any engine tuning ?
MM!
Look forward to seeing your heat shields done in alloy
Going to send a bunch of brackets of to be done in aluminium alloy for some extra bling value
Seen a Xanthius with a ZX6 swingarm on it at the weekend and that has spurred me on to get the MotoGP arm built Next influx of cash coming in it will get sent off for modding
You going to do any engine tuning ?
MM!
Nothing worse than having an H and not being able to scratch it !
Living life on the edge, SuPposedly
Living life on the edge, SuPposedly
-
- Posts: 22
- Joined: Thu Oct 13, 2011 2:48 pm
- My Bike: kawasaki zxr 400 h1
- Location: cambridgeshire
Re: h1 fairings needed
that sounds cool and im not sure whats best in tuning them lol ? and im up to three now and when my alloy bits are done i will post some pics in the build thread
deano
deano
HELL WAS FULL SO THEY SENT ME BACK
- Mori Man
- Blingmeister
- Posts: 1976
- Joined: Thu May 10, 2007 3:30 pm
- My Bike: ZXR400J2
- Location: JAPAN
Re: h1 fairings needed
For a street bike:
Full Exhaust
Carb tune or FCRs
SP, Kit, BEET or Kent cams
That gives a shed load more power
then,
Head skim , port n polish
Kit CDI or programable
For a wee bit more
Full Exhaust
Carb tune or FCRs
SP, Kit, BEET or Kent cams
That gives a shed load more power
then,
Head skim , port n polish
Kit CDI or programable
For a wee bit more
Nothing worse than having an H and not being able to scratch it !
Living life on the edge, SuPposedly
Living life on the edge, SuPposedly
-
- Posts: 22
- Joined: Thu Oct 13, 2011 2:48 pm
- My Bike: kawasaki zxr 400 h1
- Location: cambridgeshire
Re: h1 fairings needed
i will price that all up and let you know what im goin to do
thanks for all your help mm
thanks for all your help mm
HELL WAS FULL SO THEY SENT ME BACK