Tail tidys....
Moderator: Moderators
-
- Posts: 14
- Joined: Fri May 01, 2009 10:34 pm
- My Bike: ZXR400L
Tail tidys....
Does anyone know of a company that does a direct replacement?
Having trouble finding one.
thanks
Having trouble finding one.
thanks
-
- Posts: 30
- Joined: Fri Oct 23, 2009 10:01 pm
- My Bike: zxr400l
- Location: Sunny south
Re: Tail tidys....
Hi fella have recently got a zxr 400 and have got a tail tidy on it that came with the bike. Make i think is called rarse end to be fair its not realy my cup of tea it made the bike look like it had been hit up the butt end more like but a bit of bending and shaping to angle it skywards has sorted it for now . Seems that no one does a direct replacement and all owners must be running round with the standard pooper scooper unless anyone knows different
A DOG IS FOR LIFE NOT JUST A FRIDAY NIGHT
-
- L-plate hell
- Posts: 450
- Joined: Wed Mar 12, 2008 12:37 am
- My Bike: K ZXR400 L2, H Rebel 125
- Location: Hemel Hempstead, Hertfordshire
- Contact:
Re: Tail tidys....
Hi,
Are you on about tail tidy's which is more or less a number plate bracket or... an undertray which replaces the whole underneith of the back end? If so they're quite easy to get hold of and many companys make them. Ermax for example, they made mine before I sold it on. I got mine from intobikes.co.uk (warning though they're not cheap) Click here to check it out.
Regards
Rich
Are you on about tail tidy's which is more or less a number plate bracket or... an undertray which replaces the whole underneith of the back end? If so they're quite easy to get hold of and many companys make them. Ermax for example, they made mine before I sold it on. I got mine from intobikes.co.uk (warning though they're not cheap) Click here to check it out.
Regards
Rich
-
- Posts: 30
- Joined: Fri Oct 23, 2009 10:01 pm
- My Bike: zxr400l
- Location: Sunny south
Re: Tail tidys....
Hi
Its not what i mean i wanted to get a neat replacment numberplate bracket simliar to a R&G item , me I personly dont go for those undertrays .
Does any one do a replacement numberplate holder or any one made up one themselves pics?
May try and Fabricate one at work would any one be up for one if so?
Its not what i mean i wanted to get a neat replacment numberplate bracket simliar to a R&G item , me I personly dont go for those undertrays .
Does any one do a replacement numberplate holder or any one made up one themselves pics?
May try and Fabricate one at work would any one be up for one if so?
A DOG IS FOR LIFE NOT JUST A FRIDAY NIGHT
- RedexRobB
- Site Admin
- Posts: 7212
- Joined: Fri Aug 30, 2002 7:37 pm
- My Bike: ZXR400L3
- Location: Ipswich, Suffolk
Re: Tail tidys....
i used a GTmoto numberplate bracket that i got from halfords. Ill get some pics up for you when the weathers better. Plate is nice n solid and indicators are well fitted too.
-
- Posts: 30
- Joined: Fri Oct 23, 2009 10:01 pm
- My Bike: zxr400l
- Location: Sunny south
Re: Tail tidys....
HI where and when did you buy that, was it from a large halfords and price?RedexRobB wrote:i used a GTmoto numberplate bracket that i got from halfords. Ill get some pics up for you when the weathers better. Plate is nice n solid and indicators are well fitted too.
Cheers fella
A DOG IS FOR LIFE NOT JUST A FRIDAY NIGHT
- RedexRobB
- Site Admin
- Posts: 7212
- Joined: Fri Aug 30, 2002 7:37 pm
- My Bike: ZXR400L3
- Location: Ipswich, Suffolk
Re: Tail tidys....
Werent a particularly large halfords, Motrax make exactly the same one. I suspect they are motrax products re-branded to GT Moto. Was in the managers special (aka reduced item) section for 14.99 down from 19.99.
-
- Posts: 30
- Joined: Fri Oct 23, 2009 10:01 pm
- My Bike: zxr400l
- Location: Sunny south
Re: Tail tidys....
Yep spotted those on halfords website they are the old motrax ones called rrarse ends i have one on my bike they are a bit crappy
I did spot some tidys from a company called D3
www.d3components,co,uk not for the 400 but they look neat and they can make them for any bike but i bet they cost a fair penny
I did spot some tidys from a company called D3
www.d3components,co,uk not for the 400 but they look neat and they can make them for any bike but i bet they cost a fair penny
A DOG IS FOR LIFE NOT JUST A FRIDAY NIGHT
-
- Posts: 26
- Joined: Sun Oct 04, 2009 7:51 pm
- My Bike: Aprilia rs 125
Re: Tail tidys....
im sure motrax or r&g do a universal tail tidy......
-
- zxr400 oc member
- Posts: 485
- Joined: Tue May 15, 2007 6:13 pm
- My Bike: zxr 400
- Location: SHREWSBURY
Re: Tail tidys....
Would this be what your on about Rob?
http://www.halfords.com/webapp/wcs/stor ... yId_165547
I need something like this, i gave up on the idea of an aftermarket undertray (don't like the twin lights), soo i just hacked the standard one down, removing the number plate hanger and indicator mounting points.
http://www.halfords.com/webapp/wcs/stor ... yId_165547
I need something like this, i gave up on the idea of an aftermarket undertray (don't like the twin lights), soo i just hacked the standard one down, removing the number plate hanger and indicator mounting points.
I BRAKE FOR CAKE!!
Definitive mechanics toolkit: A hammer and a condom,
If it can't be fixed with a hammer, f*** it!!
Definitive mechanics toolkit: A hammer and a condom,
If it can't be fixed with a hammer, f*** it!!
- RedexRobB
- Site Admin
- Posts: 7212
- Joined: Fri Aug 30, 2002 7:37 pm
- My Bike: ZXR400L3
- Location: Ipswich, Suffolk
Re: Tail tidys....
thats the one. Im working on the bike this afternoon so ill get some pics up for you all on how ive done it
-
- zxr400 oc member
- Posts: 485
- Joined: Tue May 15, 2007 6:13 pm
- My Bike: zxr 400
- Location: SHREWSBURY
Re: Tail tidys....
I've hopefully sorted my tail tidy issues now. I chopped a fair amount of plastic off the standard back end and bolted the tail tidy from my old B1H on there.
What you guys reckon? It stills needs the plastic tidying, where its been "shaved" down.
What you guys reckon? It stills needs the plastic tidying, where its been "shaved" down.
You do not have the required permissions to view the files attached to this post.
I BRAKE FOR CAKE!!
Definitive mechanics toolkit: A hammer and a condom,
If it can't be fixed with a hammer, f*** it!!
Definitive mechanics toolkit: A hammer and a condom,
If it can't be fixed with a hammer, f*** it!!
-
- Posts: 30
- Joined: Fri Oct 23, 2009 10:01 pm
- My Bike: zxr400l
- Location: Sunny south
-
- zxr400 oc member
- Posts: 485
- Joined: Tue May 15, 2007 6:13 pm
- My Bike: zxr 400
- Location: SHREWSBURY
Re: Tail tidys....
Plate is off my old bike, which has been written off, bike is much much older than that!!
I BRAKE FOR CAKE!!
Definitive mechanics toolkit: A hammer and a condom,
If it can't be fixed with a hammer, f*** it!!
Definitive mechanics toolkit: A hammer and a condom,
If it can't be fixed with a hammer, f*** it!!