ZXR400 H1 Full Colour Wiring Diagram
Moderator: Moderators
- MaDMaNM1Ke
- Posts: 26
- Joined: Tue Jun 24, 2008 11:36 pm
- My Bike: ZXR400 Streetfighter
- Location: Birmingham, GB
ZXR400 H1 Full Colour Wiring Diagram
Hi
Ive been having trooble reading the ZXR400 H1 wiring diagram due to quality. So on that note Ive redrawn the whole wiring diagram from a L1 diagram full colour with H1 lables & removed everything that wasnt on the H1 diagram from the L1
HOPE THIS WILL HELP YOU PEOPLE WHO HAS BEEN HAVING THE SAME PROBLEMS AS ME AND CANT READ THE DAM ORIGINAL ONE
Downlink Here http://www.2shared.com/photo/hQrTP-iQ/Z ... ll_Co.html
Ive been having trooble reading the ZXR400 H1 wiring diagram due to quality. So on that note Ive redrawn the whole wiring diagram from a L1 diagram full colour with H1 lables & removed everything that wasnt on the H1 diagram from the L1
HOPE THIS WILL HELP YOU PEOPLE WHO HAS BEEN HAVING THE SAME PROBLEMS AS ME AND CANT READ THE DAM ORIGINAL ONE
Downlink Here http://www.2shared.com/photo/hQrTP-iQ/Z ... ll_Co.html
You do not have the required permissions to view the files attached to this post.
-
- Posts: 4
- Joined: Sun Mar 27, 2011 11:35 pm
- My Bike: '90 ZXR400 H2
- Mori Man
- Blingmeister
- Posts: 1976
- Joined: Thu May 10, 2007 3:30 pm
- My Bike: ZXR400J2
- Location: JAPAN
Re: ZXR400 H1 Full Colour Wiring Diagram
Nice Work fella
Now where's that Pink wire
Now where's that Pink wire
Nothing worse than having an H and not being able to scratch it !
Living life on the edge, SuPposedly
Living life on the edge, SuPposedly
- RedexRobB
- Site Admin
- Posts: 7212
- Joined: Fri Aug 30, 2002 7:37 pm
- My Bike: ZXR400L3
- Location: Ipswich, Suffolk
Re: ZXR400 H1 Full Colour Wiring Diagram
Somehow, i dont think they are going to give that away that easily! Thing is tho, is that diagram for a Jap market ZXR? Cos they will be the ones with the restriction.Mori Man wrote:Nice Work fella
Now where's that Pink wire
- MaDMaNM1Ke
- Posts: 26
- Joined: Tue Jun 24, 2008 11:36 pm
- My Bike: ZXR400 Streetfighter
- Location: Birmingham, GB
Re: ZXR400 H1 Full Colour Wiring Diagram
Thats right m8 they ant just gonna give it away But when i rebuilt my loom i did look where it went but completly forgot. ^^ Anyway yes its for a jap import as my log book says registered in uk 96 when its a h1 89 that being said it should be a import. Its got a Z on CDI and does have a pink wire from CDI and nothing speedo end.
-
- Posts: 132
- Joined: Tue Aug 26, 2008 8:29 pm
- My Bike: zx7r / zxr400
Re: ZXR400 H1 Full Colour Wiring Diagram
Really good work there on the diagram. Ive just become the proud owner of my first H1 (and SP) which is a jap import, imported in 96. Ive had lots of L's before as I race them, but know nothing of the 'Z' CDI. Could anyone in the know tell me whether this bike would be restricted, how to tell and what I need to do to derestrict. Thanks
-
- zxr400 oc member
- Posts: 212
- Joined: Mon Jun 20, 2011 10:25 pm
- My Bike: ZXR400L1/VT750C2B/VT600
- Location: Norwich, England
- Contact:
Re: ZXR400 H1 Full Colour Wiring Diagram
correct me if im wrong but it wont rev past 10,000 and as far as i kno u replace the CDIMax4music wrote:how to tell
-
- Posts: 132
- Joined: Tue Aug 26, 2008 8:29 pm
- My Bike: zx7r / zxr400
Re: ZXR400 H1 Full Colour Wiring Diagram
Is it really that easy, just replace the CDI? I have both blue and yellow (import) CDI's so which do I use?
Thanks
Max
Thanks
Max
- zxr400rider
- zxr400 oc member
- Posts: 59
- Joined: Mon Nov 30, 2009 8:14 pm
- My Bike: zxr400 h1
- Location: swindon
Re: ZXR400 H1 Full Colour Wiring Diagram
i got a h1 aswell all i did to derestrict it was the resistor mod listed somewhere on this site, basically you buy a 10k ohm resistor cut the pink wire going to cdi, solder inline then connect direct to battery hey presto 1 derestricted 400 that goes like hell
ZXR400 H1 gsxr600 srad rear shock, h2 front forks, delkevic downpipes, art end can,110 mainjets, braided brake lines, L model single seat, led rear light and LOTS of fun
-
- L-plate hell
- Posts: 254
- Joined: Mon Feb 08, 2010 6:47 pm
- My Bike: tomos moped
Re: ZXR400 H1 Full Colour Wiring Diagram
Hi Guys,
Im having trouble , spluttering......
Cleaned the carbs fanatically!, synced them... still not running right.....
So I just noticed in this wiring diagram ,its different to the one on the home page.. the coil wires are different.
Theres 2 different diagrams on the home page one,the one I went by....
Its the lower drawing near the bottom of the page... its clearer the the first diagram thats why i went by it .
So I have a black to cly1, Green to cly2, red to cly3 and red to cly4.
If I'm correct this is wrong???
Also in this diagram it says gy to cly3, I have no GY mine is green??
Any help much appreciated,
Thanks.
Im having trouble , spluttering......
Cleaned the carbs fanatically!, synced them... still not running right.....
So I just noticed in this wiring diagram ,its different to the one on the home page.. the coil wires are different.
Theres 2 different diagrams on the home page one,the one I went by....
Its the lower drawing near the bottom of the page... its clearer the the first diagram thats why i went by it .
So I have a black to cly1, Green to cly2, red to cly3 and red to cly4.
If I'm correct this is wrong???
Also in this diagram it says gy to cly3, I have no GY mine is green??
Any help much appreciated,
Thanks.
-
- L-plate hell
- Posts: 254
- Joined: Mon Feb 08, 2010 6:47 pm
- My Bike: tomos moped
Re: ZXR400 H1 Full Colour Wiring Diagram
any at all??
- banner001
- Track day God
- Posts: 2589
- Joined: Sat Sep 24, 2011 3:27 pm
- My Bike: ZXR400 L4
- Location: Nuneaton
Re: ZXR400 H1 Full Colour Wiring Diagram
I'm aware that this picture has been lost to the passage of time...I'll redo it and do the outstanding L5 as well...soon...
UK ZXR400 L3 (1993) - Fully restored and on the roads, my green beast!
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said
- banner001
- Track day God
- Posts: 2589
- Joined: Sat Sep 24, 2011 3:27 pm
- My Bike: ZXR400 L4
- Location: Nuneaton
Re: ZXR400 H1 Full Colour Wiring Diagram
Ive been slowly working on this, and i think ive got it all correct for the H1 now. I just need to colour it, and cleanup some of the graphics...so watch this space...
UK ZXR400 L3 (1993) - Fully restored and on the roads, my green beast!
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said