Does anyone know whether the lower seal on the steering stem is a part that can be sourced?
I'm replacing my head race bearings after having the frame powder coated and the bearing kit I sourced doesn't come with seals and having spoken to Kawasaki, Wemoto, M&P and several other people no bearing kits available include seals. Also Kawasaki don't list it as a separate part and it's not listed on the microfiche, very odd.
There luckily doesn't seem to be too much wear on the seal on the steering stem so if I can't find a replacement hopefully plenty of grease will keep dirt off the new bearings.
Ideas anyone?
Headrace Bearing Seal H1
Moderator: Moderators
-
- Posts: 6
- Joined: Mon Oct 10, 2011 8:23 pm
- My Bike: 1989 zxr400 J1 (SP)
- Location: Nailsea, Bristol, UK
- banner001
- Track day God
- Posts: 2589
- Joined: Sat Sep 24, 2011 3:27 pm
- My Bike: ZXR400 L4
- Location: Nuneaton
Re: Headrace Bearing Seal H1
A lot of H1 parts are no longer available and as rubber parts perish naturally over time you cant hoard stock like you can mechanical parts.
The H2 (33x47x2.5) and L seals (43x55x4) seals are still available, does it look like either of these would be the correct size?
The H2 (33x47x2.5) and L seals (43x55x4) seals are still available, does it look like either of these would be the correct size?
UK ZXR400 L3 (1993) - Fully restored and on the roads, my green beast!
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said