Just wondering if anybody would know the external diameter of the handle bar tubes?
Only asking because ive replaced them on my L model and everything seems to be loose when all the bolts and clamps are tight on both sides. I.E. The master cylinder, switch gear and the clutch lever all spin on the bar.
Cheers
Paul.
Handle bar tube diameters.
Moderator: Moderators
-
- Posts: 1
- Joined: Thu Aug 23, 2012 10:41 pm
- My Bike: zxr 400
- banner001
- Track day God
- Posts: 2589
- Joined: Sat Sep 24, 2011 3:27 pm
- My Bike: ZXR400 L4
- Location: Nuneaton
Re: Handle bar tube diameters.
im almost certain its a standard 22mm handlebar, or 7/8" in old money...
UK ZXR400 L3 (1993) - Fully restored and on the roads, my green beast!
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said
- RedexRobB
- Site Admin
- Posts: 7212
- Joined: Fri Aug 30, 2002 7:37 pm
- My Bike: ZXR400L3
- Location: Ipswich, Suffolk
Re: Handle bar tube diameters.
Switch gear has pins that locate in a hole on the bar, but if the master cylinder is doing it then something isn't right. Im pretty certain there is no particular way round the clamps go so perhaps u have the wrong size bars??? Can you get a piccie up?