H1 forks: damping adjusters
Moderator: Moderators
-
OzzyDave
- zxr400 oc member
- Posts: 16
- Joined: Mon Aug 01, 2011 12:14 am
- My Bike: ZXR400H1, CBR929RR
- Location: Sydney, Australia
H1 forks: damping adjusters
The H manual downloaded from Zxr world shows different damping adjusters to those fitted on my grey import. Does anyone have any info on H1 forks and suspension settings? I've had the rear shock rebuilt and the seals were done on the forks before I bought it but the front end feels odd and seems to drift wide in hard cornering. Any help welcomed.
Shiny side up, mostly.
-
Mori Man
- Blingmeister
- Posts: 1976
- Joined: Thu May 10, 2007 3:30 pm
- My Bike: ZXR400J2
- Location: JAPAN
Re: H1 forks: damping adjusters
Damping adjusters 
Some models had pre-load on the top so you could dial them in for your weight.
The tops of the forks should stick out from the top bridge so that only the fork tube is being clamped - check this setting.
Some models had pre-load on the top so you could dial them in for your weight.
The tops of the forks should stick out from the top bridge so that only the fork tube is being clamped - check this setting.
Nothing worse than having an H and not being able to scratch it !
Living life on the edge, SuPposedly
Living life on the edge, SuPposedly