Hi all,
Just after some info for fork top and how to adjust them also are they H1 or H2.
When trying to turn adjuster with screwdriver it is tight and won't move left or right, do i have to loosen the nut below it before i can turn the screw.
Put a pic up for identification and so you can see what i mean.
Thanks.
H Fork top
Moderator: Moderators
-
- Posts: 95
- Joined: Thu Jan 13, 2011 1:03 am
- My Bike: 1988 ZX400-F3
- Location: Ashton-u-Lyne
H Fork top
[b][color=#FF0000]If your not living on the edge, then your taking up to much room.[/color][/b]
-
- zxr400 oc member
- Posts: 3341
- Joined: Sat Jan 08, 2005 10:33 am
- My Bike: tomos moped
- Location: Carrickfergus Northern Ireland
Re: H Fork top
no you dont need to loosen the nut...........the screw should turn.
but it's likely to be siezed.
Has the fork been serviced recently ?
but it's likely to be siezed.
Has the fork been serviced recently ?
-
- Posts: 95
- Joined: Thu Jan 13, 2011 1:03 am
- My Bike: 1988 ZX400-F3
- Location: Ashton-u-Lyne
Re: H Fork top
Hi Cargo,
Thanks for reply, All i have done is replace the seals and dustcover,
next job is to remove rust from top are they a pain to unseize.
Cheers
Thanks for reply, All i have done is replace the seals and dustcover,
next job is to remove rust from top are they a pain to unseize.
Cheers
[b][color=#FF0000]If your not living on the edge, then your taking up to much room.[/color][/b]