Hi Guys,
I've replaced the rear shock on my zxr, but theres no static sag now. The spring has a (roughly) 20mm plastic/nylon collar on, where as the original shock didnt.
I guess I should remove the plastic collar from the shock, as theres plenty of threads to wind the preload on when its not there? What should the static sag be? about 5-10mm?
(this is my first mono-shock bike so I've never dealt with anything like this on the rear)
Static sag on the rear
Moderator: Moderators
-
- zxr400 oc member
- Posts: 3341
- Joined: Sat Jan 08, 2005 10:33 am
- My Bike: tomos moped
- Location: Carrickfergus Northern Ireland
Re: Static sag on the rear
If you have no static sag then you need to take preload off.............I suppose that if that means removing the plastic collar then so be it.
But why was it there in the first place?.
What make of shock is it ?
But why was it there in the first place?.
What make of shock is it ?