Gullwing top triple
Moderator: Moderators
-
- L-plate hell
- Posts: 307
- Joined: Sat Aug 02, 2008 4:29 pm
Gullwing top triple
I'm having a friend make me a gullwing style top triple, 20mm rise, to match up better to the ZX6r forks. Just thought I'd check to see if anyone else would be interested in one for themselves? I don't even know how much he'd charge yet. But all the prep and set-up will have been done on my bike.
-
- L-plate hell
- Posts: 254
- Joined: Mon Feb 08, 2010 6:47 pm
- My Bike: tomos moped
Re: Gullwing top triple
what do you mean by 2o mm rise,and what advantage would it be,just wondering ,thanks
-
- L-plate hell
- Posts: 307
- Joined: Sat Aug 02, 2008 4:29 pm
Re: Gullwing top triple
Either side of the top triple would be 20mm higher than the center. This will better match the ZX6r forks which are about 25mm longer than the stock forks.
---------------\________/--------------
---------------\________/--------------
-
- L-plate hell
- Posts: 307
- Joined: Sat Aug 02, 2008 4:29 pm
Re: Gullwing top triple
Finally got the top triple....... Here's a few pics
You do not have the required permissions to view the files attached to this post.
- RedexRobB
- Site Admin
- Posts: 7212
- Joined: Fri Aug 30, 2002 7:37 pm
- My Bike: ZXR400L3
- Location: Ipswich, Suffolk
Re: Gullwing top triple
thats really nice. How much did he charge you in the end?
-
- L-plate hell
- Posts: 307
- Joined: Sat Aug 02, 2008 4:29 pm
Re: Gullwing top triple
He requested that I not post the cost. He thought it was a low price. I thought there might be a few on the list interested in one, at the price he'll want to sell, probably 250-300 pounds, I'm not so sure. It is light and strong, pocketed on the bottom, made from 7075 aluminum. I'll post some photos of the bottom when I pull it off to clear coat it to keep it from oxidizing.RedexRobB wrote:thats really nice. How much did he charge you in the end?