L model front dics diameter
Moderator: Moderators
- andyvanderpandy
- zxr400 oc member
- Posts: 113
- Joined: Sun Dec 09, 2007 10:12 pm
- My Bike: zxr400L3
L model front dics diameter
its hard to measure them while theyre on the bike y'know! does anyone know what diameter l model front discs are? my best guess is 310mm
with H models being 10mm smaller
also has anyone here tried puttin nissin 4 pots from a cbr600rr on zxr? i hear theyre better than the gsxr sets some people use.
with H models being 10mm smaller
also has anyone here tried puttin nissin 4 pots from a cbr600rr on zxr? i hear theyre better than the gsxr sets some people use.
- masterofinsanity
- Site Admin
- Posts: 8103
- Joined: Thu Aug 29, 2002 12:36 am
- My Bike: Aprilia Tuono Fighter
- Location: England
- Contact:
Re: L model front dics diameter
i think the Ls are 320mm and H's 310mm?
Don't forget people there is more to the zxr400 than this forum... check out www.zxrworld.co.uk also.
- andyvanderpandy
- zxr400 oc member
- Posts: 113
- Joined: Sun Dec 09, 2007 10:12 pm
- My Bike: zxr400L3
- andyvanderpandy
- zxr400 oc member
- Posts: 113
- Joined: Sun Dec 09, 2007 10:12 pm
- My Bike: zxr400L3
Re: L model front dics diameter
mcn has them at 310..... but then again every other statement from them is complete lies!
http://www.motorcyclenews.com/MCN/biker ... &R=EPI-284
http://www.motorcyclenews.com/MCN/biker ... &R=EPI-284
- masterofinsanity
- Site Admin
- Posts: 8103
- Joined: Thu Aug 29, 2002 12:36 am
- My Bike: Aprilia Tuono Fighter
- Location: England
- Contact:
Re: L model front dics diameter
yeah MCN also state the rear brake is a 240mm drum
Don't forget people there is more to the zxr400 than this forum... check out www.zxrworld.co.uk also.
- andyvanderpandy
- zxr400 oc member
- Posts: 113
- Joined: Sun Dec 09, 2007 10:12 pm
- My Bike: zxr400L3
Re: L model front dics diameter
i think that about sums up the accuracey of their 'journalism'masterofinsanity wrote:yeah MCN also state the rear brake is a 240mm drum
- andyvanderpandy
- zxr400 oc member
- Posts: 113
- Joined: Sun Dec 09, 2007 10:12 pm
- My Bike: zxr400L3
Re: L model front dics diameter
is there any other way to tell from sight alone if a disc is L or H? is the carrier black only on the L, any markings etc?
- RedexRobB
- Site Admin
- Posts: 7212
- Joined: Fri Aug 30, 2002 7:37 pm
- My Bike: ZXR400L3
- Location: Ipswich, Suffolk
Re: L model front dics diameter
I think its marked on the disc carrier, the diameter isnt it?
- andyvanderpandy
- zxr400 oc member
- Posts: 113
- Joined: Sun Dec 09, 2007 10:12 pm
- My Bike: zxr400L3
Re: L model front dics diameter
RedexRobB wrote:I think its marked on the disc carrier, the diameter isnt it?
not that i can see...
- RedexRobB
- Site Admin
- Posts: 7212
- Joined: Fri Aug 30, 2002 7:37 pm
- My Bike: ZXR400L3
- Location: Ipswich, Suffolk
Re: L model front dics diameter
unless its the thickness ive seen? Sure ive seen something printed on the carriers before
- masterofinsanity
- Site Admin
- Posts: 8103
- Joined: Thu Aug 29, 2002 12:36 am
- My Bike: Aprilia Tuono Fighter
- Location: England
- Contact:
Re: L model front dics diameter
what you've seen robB is the min thickness of your disc. and i quote disc not dick
Don't forget people there is more to the zxr400 than this forum... check out www.zxrworld.co.uk also.
- jake
- zxr400 oc member
- Posts: 1016
- Joined: Mon Oct 02, 2006 10:03 pm
- My Bike: tomos moped
- Location: wirral
Re: L model front dics diameter
310 for the L , 300 for the H
ive seen some zxr's with fireblade nissin 4 pots, there probs the same as the 600.
They said they where good, did'nt ask about the fittin tho
- RedexRobB
- Site Admin
- Posts: 7212
- Joined: Fri Aug 30, 2002 7:37 pm
- My Bike: ZXR400L3
- Location: Ipswich, Suffolk
Re: L model front dics diameter
That could well be it then!masterofinsanity wrote:what you've seen robB is the min thickness of your disc. and i quote disc not dick
- andyvanderpandy
- zxr400 oc member
- Posts: 113
- Joined: Sun Dec 09, 2007 10:12 pm
- My Bike: zxr400L3
Re: L model front dics diameter
apparently they need drilling out for 8mm to 10mm then they fit straight on with a washer or two. ive had enough of having to take me calipers of once a month and clean the pistons etc! ive spend no end on them and theyre still goose!jake wrote:
310 for the L , 300 for the H
ive seen some zxr's with fireblade nissin 4 pots, there probs the same as the 600.
They said they where good, did'nt ask about the fittin tho
-
- Posts: 31
- Joined: Thu Sep 14, 2006 10:30 am
- My Bike: tomos moped
Re: L model front dics diameter
Hi, what year fireblade calipers ? please