What are 'ceramic type' inserts in the pistons for?
Mine are crumbling and I cannot find any replacement inserts or complete with piston housing, are they needed as they stand slightly proud of the end of the metal part of the piston?
Piston 'ceramic type' Inserts
Moderator: Moderators
-
- Posts: 3
- Joined: Sat Jul 12, 2014 10:06 am
- My Bike: Ninja Jules
- banner001
- Track day God
- Posts: 2589
- Joined: Sat Sep 24, 2011 3:27 pm
- My Bike: ZXR400 L4
- Location: Nuneaton
Re: Piston 'ceramic type' Inserts
its not an insert per se, but a physical part of the piston.
you have two options, if available for the year of bike buy OEM from a kawasaki dealer, or buy the non-OEM ones off ebay/wemoto etc... they work perfectly fine and are easier to remove for repair as you can use standard brake piston pullers to remove them.
you have two options, if available for the year of bike buy OEM from a kawasaki dealer, or buy the non-OEM ones off ebay/wemoto etc... they work perfectly fine and are easier to remove for repair as you can use standard brake piston pullers to remove them.
UK ZXR400 L3 (1993) - Fully restored and on the roads, my green beast!
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said
- Tirpitz
- zxr400 oc member
- Posts: 766
- Joined: Sun Dec 12, 2010 2:45 pm
- My Bike: Kawasaki ZXR400L4
- Location: Doncaster, South Yorkshire
Re: Piston 'ceramic type' Inserts
They are for heat dissipation. FWIW Kawasaki do not recommend using OEM sintered pads on pistons without a heat dissipating insert as it could lead to excessive brake squeal - so they say.
ZXR400 L4, purple / black / pink
Hel braided hoses
Pirelli Diablos
Ohlins steering damper
A16 carbon fibre exhaust can
Nitron Sport shock
Hel braided hoses
Pirelli Diablos
Ohlins steering damper
A16 carbon fibre exhaust can
Nitron Sport shock