Gsxr 4 pots

Moderator: Moderators

Post Reply
Tinman
Posts: 39
Joined: Mon Aug 04, 2014 9:30 pm
My Bike: Kawasaki zxr 400

Gsxr 4 pots

Post by Tinman »

Does anyone know the size of the spacers I might need to fit the gsxr 600 k3 calipers I have bought for my l9 zxr?
Damian120
Posts: 11
Joined: Tue May 21, 2013 10:53 am
My Bike: ZXR 400 L9, RVF 400 NC35
Location: Haverhill, Suffolk

Re: Gsxr 4 pots

Post by Damian120 »

Could always have them 'tapped' out to suit the original kawasaki screws. Will need an 8.2 or 8.5mm drill bit plus an M10x1.25 tap. If you do this, offer the callipers up first before putting on! Mine needed a washer on the inside of the fork leg to make them sit centrally over the disc (would scrape otherwise!)
Current Mods:
Venhill S/S Braided Brake lines
GSXR-600 K2 Front Calipers
GSXR-1000 K1 Rear Caliper
Two Brothers Racing Exhaust Can
Koso RX2n Digital Dash
2007 Yamaha R1 Rear M/C
Post Reply