inner spacer too late????

Moderator: Moderators

User avatar
Miles
zxr400 oc member
zxr400 oc member
Posts: 498
Joined: Wed Apr 30, 2008 11:00 pm
My Bike: ZXR 400 L3
Location: Bangor, Northern Ireland

Re: inner spacer too late????

Post by Miles »

Yep took the rear hub off of my l3

As for the bearing I took the original to a bearing factors and had it measured so it should be ok .

Its almost as if the inner spacer is too long...

I have rebuilt the wheel as in the manual, both bearings have their circlip in place but one isn't seated fully due to the spacer
Post Reply