Hello all
Does anyone have a how to change a clutch write up?
ive seen this for the torque settings
http://www.zxrworld.co.uk/zxr400/manual.html
so happy with that just need a quick guide what to do and what order
thank you in advance
alex
Changing clutch? how to
Moderator: Moderators
- masterofinsanity
- Site Admin
- Posts: 8103
- Joined: Thu Aug 29, 2002 12:36 am
- My Bike: Aprilia Tuono Fighter
- Location: England
- Contact:
Don't forget people there is more to the zxr400 than this forum... check out www.zxrworld.co.uk also.
- masterofinsanity
- Site Admin
- Posts: 8103
- Joined: Thu Aug 29, 2002 12:36 am
- My Bike: Aprilia Tuono Fighter
- Location: England
- Contact:
have you looked at the H manual as well?? you need to use both manuals if you have a L model.
Don't forget people there is more to the zxr400 than this forum... check out www.zxrworld.co.uk also.
-
- Posts: 6
- Joined: Thu Jun 08, 2006 10:48 am
ok reading on it
remove cover
undo four bolts with springs etc
then im guessing u slide the friction plates and clutch plates out?
but according to the manual u it says to remove the clutch nut which looks like to me what holds the clutch basket in place
why do i have to remove that? if im just swoping the plates?
remove cover
undo four bolts with springs etc
then im guessing u slide the friction plates and clutch plates out?
but according to the manual u it says to remove the clutch nut which looks like to me what holds the clutch basket in place
why do i have to remove that? if im just swoping the plates?
- masterofinsanity
- Site Admin
- Posts: 8103
- Joined: Thu Aug 29, 2002 12:36 am
- My Bike: Aprilia Tuono Fighter
- Location: England
- Contact:
as you say remove cover, and springs then remove plates, note which way the steel plates go, apparently there is a difference, 20 minute job mate. forget the centre nut,not needed.
Don't forget people there is more to the zxr400 than this forum... check out www.zxrworld.co.uk also.