Basically when I pull my clutch lever in fully, there is still quite alot of resistance from the gears. I have tried tightening the cable at both ends (actuator rod and lever) however this just makes the clutch stiffer but not disengage properly.
Is this a symptom of new plates required or a new basket or the whole thing?
Cheers guys.
Clutch not fully disengaging
Moderator: Moderators
-
- Posts: 197
- Joined: Fri Jan 25, 2013 12:33 pm
- My Bike: CBR600RR, ZXR400 L-2
- Location: Waterlooville, Hampshire