Is this still a thing?
I've got the following if anyone wants to swap with me
2.25 - 2
2.30 - 1
2.35 - 3
2.40 - 1
2.60 - 1
2.80 - 2
2.85 - 4
2.90 - 1
zxrworld shim collection
Moderator: Moderators
- jamesgoodfella
- zxr400 oc member
- Posts: 35
- Joined: Thu Dec 03, 2015 11:26 am
- My Bike: ZXR400 H1 + CB350K2
- Location: Bristol - BS16
- Contact:
Re: zxrworld shim collection
masterofinsanity wrote:or use a Duplo brick
-
- Posts: 35
- Joined: Thu Feb 02, 2017 12:39 pm
- My Bike: Honda NC30
Re: zxrworld shim collection
Also need some shims!
I need:
2.90 x2
2.95 x3
3.00 x2
Does anyone have these?
I need:
2.90 x2
2.95 x3
3.00 x2
Does anyone have these?
Nc30 track hack
Zxr400 L4 project road bike
Xj900 motorway muncher
Zxr400 L4 project road bike
Xj900 motorway muncher
-
- Posts: 10
- Joined: Wed Apr 12, 2017 2:21 pm
- My Bike: ZXR 400 L3
Re: zxrworld shim collection
I'm doing my clearances this week, I do already have a collection of shims if anyone doesn't mind swapping once I know what I need? Cheers
-
- Posts: 17
- Joined: Wed Aug 02, 2017 4:37 pm
- My Bike: Zxr400 race, cbr600F3 rac
Re: zxrworld shim collection
Gents
I need the following shims
2.91 x2
2.97 X1
2.98 x2
3.35 X1
3.15 x4
For exchange
2.95 x2
3.02 X1
3.19 x4
3.39 X1
Trying to get this done asap as this is for ace bike
Many thanks
M
I need the following shims
2.91 x2
2.97 X1
2.98 x2
3.35 X1
3.15 x4
For exchange
2.95 x2
3.02 X1
3.19 x4
3.39 X1
Trying to get this done asap as this is for ace bike
Many thanks
M
- banner001
- Track day God
- Posts: 2589
- Joined: Sat Sep 24, 2011 3:27 pm
- My Bike: ZXR400 L4
- Location: Nuneaton
Re: zxrworld shim collection
Any 7.48mm Shim will fit the engine, i dont think anyone really does the shim swap anymore, if you are buying more than 7 shims, this place is the cheapest i know of.
https://www.ebay.co.uk/itm/Honda-CRF-15 ... SwstxU2NiC
https://www.ebay.co.uk/itm/Honda-CRF-15 ... SwstxU2NiC
UK ZXR400 L3 (1993) - Fully restored and on the roads, my green beast!
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said
- banner001
- Track day God
- Posts: 2589
- Joined: Sat Sep 24, 2011 3:27 pm
- My Bike: ZXR400 L4
- Location: Nuneaton
Re: zxrworld shim collection
3.3+mm shims are quite big for this bike, have you had the cam-profile re-ground?
also the place i quoted does 0.05mm increments (fairly standard, it it possible to find 0.025mm increments as well if you look hard)
so you need:
2.90 x2
2.95 x1
3.00 x2
3.35 x1
3.15 x4
also the place i quoted does 0.05mm increments (fairly standard, it it possible to find 0.025mm increments as well if you look hard)
so you need:
2.90 x2
2.95 x1
3.00 x2
3.35 x1
3.15 x4
UK ZXR400 L3 (1993) - Fully restored and on the roads, my green beast!
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said
-
- Posts: 17
- Joined: Wed Aug 02, 2017 4:37 pm
- My Bike: Zxr400 race, cbr600F3 rac
Re: zxrworld shim collection
Cheers fella for the info.
I know Kent Cams with manufacture to your specification be it slightly more expensive !!
Regards
I know Kent Cams with manufacture to your specification be it slightly more expensive !!
Regards