Hi Lads, I would need to know the piston to head clearance (squish) on a standard L8 engine.
Thanks in advance
Rubencio
Standard squish - please help
Moderator: Moderators
-
- Posts: 19
- Joined: Mon Nov 16, 2015 9:04 pm
- My Bike: Ktm 660 Smc
Standard squish - please help
Last edited by Rubencio on Tue Jan 31, 2017 9:14 pm, edited 1 time in total.
- CaNsA
- zxr400 oc member
- Posts: 1741
- Joined: Sat Nov 29, 2008 4:02 pm
- My Bike: ZX6R F1
- Location: Liverpool
Re: Standard squish
Moderator & Skilled Ban Hammer Operator!
Has this forum helped you out? Say thanks by donating some of your hard earned cash towards running costs.
:: <=-LOADED TELLY BOXES - NO CONTRACT - NO SUBSCRIPTION - PM ME-=> ::
Has this forum helped you out? Say thanks by donating some of your hard earned cash towards running costs.
:: <=-LOADED TELLY BOXES - NO CONTRACT - NO SUBSCRIPTION - PM ME-=> ::
-
- Posts: 19
- Joined: Mon Nov 16, 2015 9:04 pm
- My Bike: Ktm 660 Smc
Re: Standard squish
Hi mate,
I have checked the manual, and look at the "top end" chapter.
I could not found this value, unless it has been called with some other name, could you please help me?
cheers
Ruben
I have checked the manual, and look at the "top end" chapter.
I could not found this value, unless it has been called with some other name, could you please help me?
cheers
Ruben
- CaNsA
- zxr400 oc member
- Posts: 1741
- Joined: Sat Nov 29, 2008 4:02 pm
- My Bike: ZX6R F1
- Location: Liverpool
Re: Standard squish
*rolls eyes*
Chapter 4, page 5
It's right there.
Chapter 4, page 5
It's right there.
Moderator & Skilled Ban Hammer Operator!
Has this forum helped you out? Say thanks by donating some of your hard earned cash towards running costs.
:: <=-LOADED TELLY BOXES - NO CONTRACT - NO SUBSCRIPTION - PM ME-=> ::
Has this forum helped you out? Say thanks by donating some of your hard earned cash towards running costs.
:: <=-LOADED TELLY BOXES - NO CONTRACT - NO SUBSCRIPTION - PM ME-=> ::
-
- Posts: 19
- Joined: Mon Nov 16, 2015 9:04 pm
- My Bike: Ktm 660 Smc
Re: Standard squish
chapter 4 Page 5
This is what is listed:
Valve stem diameter
Valve guide inside diameter
Cylinder inside diameter
Piston diameter
Piston/cylinder clearance
Oversize piston and rings
Piston ring/groove clearance
Piston ring end gap
Which one represent the piston to head clearance?
thanks
R.
This is what is listed:
Valve stem diameter
Valve guide inside diameter
Cylinder inside diameter
Piston diameter
Piston/cylinder clearance
Oversize piston and rings
Piston ring/groove clearance
Piston ring end gap
Which one represent the piston to head clearance?
thanks
R.