Hey guys, was looking at the underneath of the cylinder head and wondered which channels were for water ways and which are oil?
As reference see post on this thread ( Fri Jul 06, 2007 1:30 pm) which shows the base of the cylinder head:
viewtopic.php?f=87&t=2600
Oil and Water Ways/Channels
Moderator: Moderators
- banner001
- Track day God
- Posts: 2589
- Joined: Sat Sep 24, 2011 3:27 pm
- My Bike: ZXR400 L4
- Location: Nuneaton
Re: Oil and Water Ways/Channels
any channels in the barrels are for coolant with the exception of the camchain shaft on the RHS of the engine.
there is a tube going from the cases to the cylinder head that feeds oil to the camshafts/rockers, this oil drains on the RHS of the engine down the camchain shaft.
as for the cylinder head there are only coolant passageways cut into the base of it.
there is a tube going from the cases to the cylinder head that feeds oil to the camshafts/rockers, this oil drains on the RHS of the engine down the camchain shaft.
as for the cylinder head there are only coolant passageways cut into the base of it.
UK ZXR400 L3 (1993) - Fully restored and on the roads, my green beast!
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said