Hi, new to the forum (well new to posting) and have a question about those running SP cams to kit spec clearances...
Do they sound like the motor is rattling itself to bits?
Kit Spec Valve Clearances
Moderator: Moderators
-
- Posts: 46
- Joined: Thu Dec 08, 2005 10:49 pm
- My Bike: zxr 400 x 3
- Location: suffolk
Re: Kit Spec Valve Clearances
Yes .I normally set mine to standard but on the top end of the setting
-
- Posts: 2
- Joined: Wed Apr 17, 2013 10:22 am
- My Bike: zxr400
Re: Kit Spec Valve Clearances
Thanks, that's good to know although it has lasted 10+ trackdays this year without exploding lol. I've recently checked/adjusted them to the lower limit of kit spec as a few were tight (even for standard spec) and a few were slack.
-
- Posts: 100
- Joined: Fri Jul 23, 2010 10:50 pm
- My Bike: zxr400 L racebike/R1
Re: Kit Spec Valve Clearances
been told by a reputable racer/bike builder that the kit spec clearances are a waste of time, best sticking to standard ones. they sound like death anyway
zxr400L Race Bikes Competing in EDIASIA F400 and thunderbikes with BMCRC in 2016 and an RD125LC MK1 restoration project