ANOTHER fueling question

[CrazyChris]

Right guys. Back to G model. Running the 32 carbs for the sake of being clear. Been struggling like hell to get her to run properly and finally I can say I am very very close. Just one thing that I need help with. Every time I take her for a test ride she goes ok (ish) but when I get back home the bike straight forward refuse to idle, then floods. Running the screws (dunno if its fuel screws or air screws, jury is still out on that I think) at 2 turns. Standard air filter but with a full BEET system of a ZXR400. Can someone please advise on how to get the bike to idle after a ride. Thanks.
P.S. It does the same from 3 turns all the way down to 1.5 turns

[CaNsA]

Have you upped the idle speed?
As far as i know, the idle speed should be set when the bike is warmed up.
Stop fucking with the air/fuel mix and ride the bike until warm, increase the idle speed until bike idles.

[CrazyChris]

Been there. Would get her nice and warm and while keeping her going with the throttle I'd adjust the idle screw. Still no joy. Its either idling at 3-4k or dead.