P1010726.JPG
Hi guys. My bike is an H1 with standard exhaust, Tyga endcan and L1 carbs. Jets and needles are all standard sizes 35, 95 and N77S, also air filter is OEM. What else I should change if I decided to drill the slide lift hole to gain a little of reaction ? Cut springs or what ? I also have a set of spare carbs with jets 35, 102 and N36Y needles that I could use or not, I don't know really ...Drill the slide lift hole and ...?,
Moderator: Moderators
-
- zxr400 oc member
- Posts: 29
- Joined: Sat Dec 04, 2010 7:16 pm
- My Bike: ZXR400 H1 '90
Drill the slide lift hole and ...?,
Hi guys. My bike is an H1 with standard exhaust, Tyga endcan and L1 carbs. Jets and needles are all standard sizes 35, 95 and N77S, also air filter is OEM. What else I should change if I decided to drill the slide lift hole to gain a little of reaction ? Cut springs or what ? I also have a set of spare carbs with jets 35, 102 and N36Y needles that I could use or not, I don't know really ...
You do not have the required permissions to view the files attached to this post.