Carbs
Moderator: Moderators
-
- Posts: 13
- Joined: Mon Apr 01, 2013 4:35 am
- My Bike: 1990 kawasaki zxr 400
Carbs
Just found out they dont make the factory carbs for a 90 zxr400 anymore. anyone know of other carbs i can put on my bike. kinda new to the whole carb thing. Also not sure if this question goes here but if i throttle down hard from the start in first gear my bike bogs down hella bad before speeding off. what could be causing it to do that?
- CaNsA
- zxr400 oc member
- Posts: 1741
- Joined: Sat Nov 29, 2008 4:02 pm
- My Bike: ZX6R F1
- Location: Liverpool
Re: Carbs
learn to slip the clutch
Moderator & Skilled Ban Hammer Operator!
Has this forum helped you out? Say thanks by donating some of your hard earned cash towards running costs.
:: <=-LOADED TELLY BOXES - NO CONTRACT - NO SUBSCRIPTION - PM ME-=> ::
Has this forum helped you out? Say thanks by donating some of your hard earned cash towards running costs.
:: <=-LOADED TELLY BOXES - NO CONTRACT - NO SUBSCRIPTION - PM ME-=> ::
- banner001
- Track day God
- Posts: 2589
- Joined: Sat Sep 24, 2011 3:27 pm
- My Bike: ZXR400 L4
- Location: Nuneaton
Re: Carbs
your pilot settings will be out, that or your carb ballancing is off.
there are plenty of guides on here to help you adjust your pilot settings.
also, its not a modern fuel injected bike, this bike actually requires "some" skill in order to make it go properly...if you want a rev and go, buy a scooter.
there are plenty of guides on here to help you adjust your pilot settings.
also, its not a modern fuel injected bike, this bike actually requires "some" skill in order to make it go properly...if you want a rev and go, buy a scooter.
UK ZXR400 L3 (1993) - Fully restored and on the roads, my green beast!
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said