Hi can anyone point me in the right direction for some new stainless headers for my h1 please,does anyone still make/sell them?
Any help greatly appreciated
Thanks
ZXR400 h1 exhaust headers???
Moderator: Moderators
-
- Posts: 4
- Joined: Wed May 03, 2017 9:11 am
- My Bike: ZXR400 H1
- banner001
- Track day God
- Posts: 2589
- Joined: Sat Sep 24, 2011 3:27 pm
- My Bike: ZXR400 L4
- Location: Nuneaton
Re: ZXR400 h1 exhaust headers???
SBS are out of business and I do t think delkevic or black widdow make them anymore, so it's ebay and Internet hunting, or find a local exhaust maker/welder, gonna cost you similar money
UK ZXR400 L3 (1993) - Fully restored and on the roads, my green beast!
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said
-
- Posts: 4
- Joined: Wed May 03, 2017 9:11 am
- My Bike: ZXR400 H1
Re: ZXR400 h1 exhaust headers???
Thanks for the reply,been looking for months with no luck.
Can’t even find a used set unfortunately.
Can’t even find a used set unfortunately.
- banner001
- Track day God
- Posts: 2589
- Joined: Sat Sep 24, 2011 3:27 pm
- My Bike: ZXR400 L4
- Location: Nuneaton
Re: ZXR400 h1 exhaust headers???
Remember, the only bits you can see is the link pipe
From ebay:
274081402091 might clean up and are genuine H pipes
143222584231 look like Micron pipes
192823975590 a bit overpriced when vat and import taken into account, but are brand new, say they are H pipes, but dont have the ballencer loops from the H
From ebay:
274081402091 might clean up and are genuine H pipes
143222584231 look like Micron pipes
192823975590 a bit overpriced when vat and import taken into account, but are brand new, say they are H pipes, but dont have the ballencer loops from the H
UK ZXR400 L3 (1993) - Fully restored and on the roads, my green beast!
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said
- banner001
- Track day God
- Posts: 2589
- Joined: Sat Sep 24, 2011 3:27 pm
- My Bike: ZXR400 L4
- Location: Nuneaton
Re: ZXR400 h1 exhaust headers???
Not H1, but these are the same sandy bike spares ones as i have fitted to my bike, needs a 52mm slip on can, and possible a bit of modification to the link pipe and or your lower RHS fairings. but ive had no issues with mine, full stainless steel too so will last very long
UK ZXR400 L3 (1993) - Fully restored and on the roads, my green beast!
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said